 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 548-1 Shielded Power Inductors-LPS4414 Series * Very low DCR; excellent current handling * 4.4 x 4.4 mm footprint; only 1.4 mm tall Designer's Kit C340 contains 3 of each values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 82.3 - 89.8 mg Ambient temperature -40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: -40C to +125C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7 reel; 3500/13 reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth PCB washing Only pure water or alcohol recommended Inductance2 Part number1 LPS4414-301ML_ LPS4414-501ML_ LPS4414-701ML_ LPS4414-102ML_ LPS4414-152ML_ LPS4414-182ML_ LPS4414-222ML_ LPS4414-332ML_ LPS4414-472ML_ LPS4414-562ML_ LPS4414-682ML_ LPS4414-822ML_ LPS4414-103ML_ LPS4414-123ML_ LPS4414-153ML_ LPS4414-183ML_ LPS4414-223ML_ LPS4414-333ML_ LPS4414-473ML_ LPS4414-563ML_ LPS4414-683ML_ LPS4414-104ML_ LPS4414-124ML_ LPS4414-154ML_ LPS4414-224ML_ LPS4414-334ML_ LPS4414-474ML_ LPS4414-564ML_ LPS4414-684ML_ LPS4414-824ML_ LPS4414-105ML_ LPS4414-155ML_ LPS4414-185ML_ LPS4414-225ML_ LPS4414-335ML_ 0.30 0.50 0.70 1.0 1.5 1.8 2.2 3.3 4.7 5.6 6.8 8.2 10 12 15 18 22 33 47 56 68 100 120 150 220 330 470 560 680 820 1000 1500 1800 2200 3300 DCR SRF max3 typ4 20% (H) (Ohms) (MHz) 0.040 0.050 0.055 0.060 0.078 0.087 0.110 0.165 0.215 0.260 0.270 0.350 0.380 0.380 0.440 0.530 0.590 0.715 0.935 1.15 1.35 1.90 2.60 3.10 4.10 6.00 9.50 10.7 11.7 15.1 16.3 26.4 35.0 42.5 56.0 470 330 225 190 150 130 115 85.0 68.0 58.0 54.0 50.0 43.0 38.0 36.0 31.0 27.0 23.0 18.0 16.0 14.6 11.0 10.0 9.0 6.7 5.6 4.3 4.0 3.5 3.0 2.6 2.2 1.9 1.9 1.3 Isat (A)5 10% 20% 30% drop drop drop 5.6 4.3 3.7 3.0 2.9 2.7 2.2 1.8 1.4 1.4 1.2 1.1 1.1 0.94 0.85 0.76 0.69 0.47 0.39 0.37 0.32 0.26 0.23 0.22 0.18 0.14 0.13 0.12 0.10 0.10 0.10 0.096 0.089 0.082 0.072 5.7 4.4 3.75 3.1 3.1 2.8 2.3 1.9 1.5 1.4 1.3 1.3 1.2 0.97 0.89 0.80 0.72 0.49 0.42 0.39 0.33 0.28 0.24 0.23 0.20 0.16 0.14 0.13 0.11 0.105 0.102 0.099 0.094 0.089 0.078 5.8 4.5 3.8 3.2 3.2 2.9 2.35 1.95 1.55 1.5 1.4 1.3 1.3 1.0 0.92 0.82 0.74 0.51 0.43 0.40 0.34 0.285 0.25 0.24 0.20 0.165 0.145 0.14 0.12 0.11 0.106 0.100 0.097 0.092 0.083 Irms (A)6 20C 40C rise rise 2.35 2.10 1.85 1.75 1.55 1.50 1.25 1.15 0.90 0.75 0.70 0.70 0.70 0.66 0.63 0.56 0.53 0.49 0.44 0.42 0.36 0.31 0.27 0.24 0.22 0.17 0.14 0.13 0.13 0.11 0.10 0.085 0.075 0.065 0.055 3.25 2.80 2.50 2.30 2.00 1.90 1.60 1.50 1.20 1.10 1.00 0.98 0.95 0.88 0.82 0.75 0.68 0.65 0.58 0.54 0.48 0.40 0.34 0.32 0.29 0.23 0.23 0.17 0.17 0.14 0.13 0.11 0.10 0.080 0.070 1. Please specify termination and packaging codes: LPS4414-223MLC Termination: L = RoHS compliant silver-palladiumplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/ 0.5) or S = non-RoHS tin-lead (63/37). Packaging: C= 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B= Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D= 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current at which the inductance drops the specified amount from its value without current. 6. Current that causes the specified temperature rise from 25C ambient. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Specifications subject to change without notice. Please check our website for latest information. Document 548-1 Revised 10/06/08 (c) Coilcraft, Inc. 2009 Document 548-2 Shielded SMT Power Inductors - LPS4414 Series Typical L vs Current 10000 3300 H Typical L vs Frequency 10000 3300 H 1000 H 1000 1000 H 330 H 1000 330 H Inductance (H) Inductance (H) 100 100 H 33 H 100 100 H 33 H 10 10 H 3.3 H 10 10 H 3.3 H 1 1 H 1 1 H 0.1 0.01 0.1 1 10 0.1 0.01 0.1 1 10 Current (A) Frequency (MHz) Current Derating 120 110 0.169 0.004 4,30 0,10 Percent of rated current 100 90 80 70 60 50 40 Dash number Internal code XXX X 0.169 0.004 4,30 0,10 Winding direction 0.0551 max 1,40 25C 30 20 10 0 -40 -20 Isat Irms 0 20 Recommended Land Pattern 0.128 3,25 0.059 1,50 40 60 80 100 120 140 0.030 typ 0,75 0.185 4,70 0.118 3,00 0.124 3,15 0.055 1,40 Ambient temperature (C) 0.030 typ 0,75 inches mm Dimensions are in 0.059 1,50 0.118 3,00 0.185 4,70 Specifications subject to change without notice. Please check our website for latest information. Document 548-2 Revised 10/06/08 (c) Coilcraft, Inc. 2009 |
Price & Availability of LPS4414-185ML
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |